Products

< >

Name： TF1200 Tube Furnace

Model： TF1200

Introduction： 1200 ℃ tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries.

氣氛保護(hù)1200°石英管

Parameter
Video
Test case
Clients

1200 ℃ tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries.

Furnace shell

The shell is made of metal Q235 low-carbon steel, and the surface is electrostatically resistant and resistant to corrosion.

The solid double-layer metal frame is combined with the heat-insulating fan structure, and the furnace surface temperature is low

Horizontal use mode, upper opening structure, easy to operate

Refractory material

Multi-layer insulation design, composed of lightweight alumina ceramic fiber and high-quality insulation board backing, does not contain asbestos components, low heat loss and low energy consumption

Heating system

High-quality HRE spiral resistance wire heating element is safely and firmly embedded on the surface of the furnace, and is heated by free heat radiation in the furnace cavity, which is energy-saving and efficient, and has a long service life

Ring heating by resistance wire to achieve good uniformity in the furnace

Temperature Control Panel

PID and SSR control mode, precise temperature control

Internationally standardized N-type nickel-chromium-silicon thermocouple with a temperature measurement range of 0-1300℃ and a long service life

The furnace door is equipped with a door-opening power-off safety protection switch

Program Controller

Advanced controllers that meet complex process requirements

Simple and direct operation, flexible programming

Programmable 30 program segments for a single curve

Over temperature and fault alarm, automatic safety protection

Vacuum Atmosphere Function

1、With 304 stainless steel sealing flange to obtain vacuum or atmosphere in the furnace tube

2、High-quality quartz glass working tube, and metal or corundum working tube can also be selected to adapt to different working conditions

Specifications

Model	TF1200-I	TF1200-II	TF1200-III	TF1200-IV	TF1200-V	TF1200-VI
Tube size	Φ25x600mm	Φ50x600mm	Φ60x1000mm	Φ80x1000mm	Φ100x1000mm	Φ120x1000mm
Max temperature	1200℃
Working temperature	1100℃
Heating size	200mm		440mm	440mm	440mm	440mm
Power supply	220V/1.8KW	220V/1.8KW	220V/2.6KW	220V/4KW	220V/4KW	220V/5KW
Heating element	HRE alloy resistance wire
Furnace material	Polycrystalline inorganic alumina ceramic fiber material prepared by wet vacuum filtration
Furnace tube material	Quartz tube
Temperature control accuracy	±1℃
Thermocouple	N type thermocouple
Temperature control instrument	Intelligent microcomputer PID temperature control instrument, SCR/SSR control, PID parameter self-tuning function; programmable 4 groups of 8 program segments, program heating, program heat preservation, program cooling
Heating rate	1-25℃/min free adjustment
Furnace structure	Furnace temperature control integrated structure, furnace opening and closing; double-layer shell, air circulation and heat insulation
Sealing performance	Both ends of the furnace tube are equipped with stainless steel metal flanges, matched with high-temperature PTFE gaskets, which can work under vacuum with a vacuum degree of ≤5pa (rotary vane vacuum pump)
atmosphere performance	There are air inlets and outlets at both ends of the flange. The pressure gauge is installed on the metal flange. The precision needle valve can adjust the air intake and output, and can be fed with protective gases such as nitrogen, argon, and hydrogen
equipment protection	Modular control, sound and light alarm signal will be sent out for over temperature and broken coupler in the working process, and the protection action will be completed automatically
safety protection	The equipment is equipped with a circuit breaker, which will automatically pop open in case of short circuit leakage, which can protect the safety of equipment and operators
shell	High-quality cold-rolled steel plate CNC machine tool blanking processing, after welding, grinding, polishing, phosphating, pickling, surface electrostatic spraying plastic powder
Optional accessories	1. Optional rotary vane vacuum pump (vacuum degree ≤ 5pa) 2. Optional digital vacuum gauge (1.0×105-1.0×10-1pa) 3. Optional float flowmeter (range 60-600ml/min) 4. Optional with quartz boat
Competitive Advantage	1、Factory direct delivery 2、Quality assurance 3、Best price 4、Compact in size 5、Complete specifications 6、Service Assurance

狠狠色丁香婷婷综合尤物_年轻漂亮的表妺3中文字幕韩国_国产精品热久久高潮AV袁孑怡_国产精品久久久久国产A级

Product Query

Contact

+86 139 1299 5166

WhatsApp

WeChat

Top